Author: Resco

It doesn’t matter whether we are considering a residential complex or a large commercial unit, especially when building a fire safety system with high response, better efficiency, and improved performance. A fire system incorporates a myriad of equipment units and components that serve different purposes but contribute towards alerting everyone on time and ensuring people can get out of the area safely.

Almost every contractor and builder nowadays includes fire systems in the properties, so the risks and fatalities can be reduced considerably. However, before integrating such an important system, it’s crucial to know the different types of components that should be there. Several circuits are connected to build a strong fire safety system in the building, from the fire alarm system to the emergency lighting system. In this article, we have illustrated some of the major

equipment units that should be present in the fire safety system to be installed in any residential or commercial building.

Fire detectors and alarms

The most preliminary and important component that every fire safety system should have is a range of detectors and alarms. Using one to two detectors and alarms will be sufficient for any small circuit that usually offers protection to a single room or a hallway.

However, most facility systems are built for a larger area, like an entire apartment building or a huge shopping complex. In this case, the entire system is segregated into multiple sections, and each section is equipped with three to four fire detectors and alarms. This way, the system can work more efficiently and indicate if there is a fire in any part of the entire property.

Smoke detectors and temperature sensors

Sometimes, the fire starts later, but the circuits or any other area prone to fire emits dense smoke. Getting everyone to safety on time before the fire spreads will become quite difficult if it remains unnoticed. This is why incorporating smoke detectors and temperature sensors in the fire safety system will prove beneficial.

The smoke detectors can find any appropriate location where smoke is present without any reason. At the same time, the temperature sensors can detect any sudden increase in indoor temperature and further trigger fire detectors and alarms.

Emergency lighting

It would help if you also had emergency lighting in the fire alarm system, as it ensures the place remains illuminated even when the main power line is cut off. For example, when the fire results from an electrical short circuit or appliance overloading, the fuse burns to prevent all other systems connected to the main circuit.

As a result, lights will be shut off, and the entire area will get darkened. Maneuvering around and moving out to safety becomes next to impossible if the fire safety system doesn’t include emergency lights.

Fire suppression system

Often having extinguishers in the fire alarm system won’t help you reduce the flames or put out the fire. This is why having a fire suppression system is crucial, especially in commercial areas. Instead of putting out the flames, the suppression system will block the source of oxygen around the place from where the fire originated. Cutting off the source will automatically help contain the flames and prevent them from becoming ferocious and fatal.

Fire and welding blankets

You cannot use a fire extinguisher on short electrical sockets. Similarly, some cases do not support a fire suppression system for putting out the flames. This is where fire and melting blankets will play, as that can efficiently cut off the supply source and prevent the flames from spreading.

Conclusion

This article has discussed some of the major components that should be included in a fire alarm system, regardless of the property type or size of the building. While choosing the safety system and equipment, you should ensure every element is of the highest quality.

Cabling is one of the significant components of any office building because it determines data transfer and communication between different peripherals. Although there are several connection types, the most popular one recently is the structured cabling in Dubai.

From the name itself, you can understand that structured cabling will help improve the overall connection system efficiency and even reduce latency. Plus, it is high performing, which is why it’s so crucial for businesses to understand the fundamentals. Studying more about the components of structured cabling is one such thing that should be done before implementing the system.

In this section, we have shared some essential details about the components of a structured cabling system.

Entrance facility

As the name suggests, the entrance facility comprises the section where the telecom provider will gain entry to the physical location of the business, whether a cabin or a building. Usually, this is identified as the location from where the wires, clips, connections, and other networking elements enter the premise and connect to all the devices. Usually, telecom providers take help from a conduit to establish the entrance facility. The entry point must be secured enough to prevent any mishap. If it suffers any damage, the entire structured cabling in Dubai will collapse or halt. You can consider the entrance facility equivalent to every single property’s electric main meter.

Equipment room

The network needed to establish the structured cabling system comprises a plethora of components. For example, the central connection hub is said to be the on-site server for the building. Sometimes, the central server serves as the direct source feed to different peripheral devices. But it is usually done for a minor premise with fewer connection points.

However, let’s consider the server to be used for a large building. Cables connect the central servers to several other sub-servers to help individual departments access the central server. The equipment room will also have network switches that can be turned off and off manually to allow appropriate connection channels. PBX and patch panels are also located within the equipment room of structured cabling in Dubai.

Backbone cabling

Backbone or riser cabling is one of the most crucial elements that cannot be ignored or left behind. It helps divert the cables to different floors and establish a parallel network. It also acts as the intermediate system between the equipment room and the peripheral devices within the business premise.

Telecommunication room and enclosure

These are areas where the backbone cabling lines terminate end. It comprises several hardware elements like computers, LANs, phones, and many more. Businesses must establish a proper communication and networking system.

Horizontal cabling

From the vertical cabling structure, horizontal cables must be drawn to connect the user’s workspace. In ideal structured cabling in Dubai, the maximum horizontal cable length is supposedly 295 feet.

Work area

Lastly, the work area defines the space where the internet connections are drawn from outlets and connected to the end devices.

Conclusion

As we have established the six significant components of structured cabling in Dubai, you can decide if all the parts are correctly arranged. Contact Resco to get expert advice on the use and ideal choice of structured cabling.

Fire is a natural calamity and it’s not something one can predict beforehand. Despite all the protection and safety measures in place, it can’t be predicted if they can prevent fire or retain the flames and stop the spread. This is why it’s crucial to have a proper fire suppression system without fail. If that’s not the case, it will be complicated to ensure the property is safe and no casualty will be there.

One of the best fire suppression systems used to date is the FM 200 system. It is highly efficient, delivers consistent performance for the longest possible time, and acts much faster than any other suppression system. Therefore, it’s crucial you know more about the recharging process. After all, if the system is not recharged, you need to wait a couple of minutes before using it the next time.

What is the FM 200 system?

The first thing to learn is about the FM 200 system itself. Once you have a basic idea of the same, you won’t have any further problems in identifying the correct time to recharge the same. It is often considered one of the Halon fire suppression system’s best alternatives because the latter is unsafe for the people in close vicinity and the environment.

Usually, the gas present inside is under high pressure and gets released into the air quickly. It does not extinguish the fire. Instead, it suppresses the source of heat, which is the life of the fire. Once the heat source is removed from the fire, the flames start to extinguish themselves.

Since no harmful chemical is used in the system, you can consider it the safest regarding ozone depletion and pollution. Plus, the FM 200 system can easily be used for residential and commercial properties. Due to all these cumulative reasons, the system is considered one of the popular protective measures.

What does recharging FM 200 mean?

In normal conditions, you will only be able to deduce if the fire suppression system is empty or still has enough gas to divert the source of heat from the fire. Therefore, recharging the FM 200 system is so crucial. Failure to do so will put you in a tough spot, so you must be more vigilant in your job.

Recharging the FM 200 fire suppression system doesn’t mean filling it with the gasses that help stop the heat source. Instead, there is a lot more work that needs to be done. For instance, all mechanical parts should be appropriately lubricated so they can function in the usual manner efficiently. Lubrication also reduces the friction between the parts, thereby suppressing mechanical wear and tear. This further extends the overall lifetime of the FM 200 system. Also, the professional service will work on checking the valves and ensure when on, the fire suppression gas doesn’t get dissolved into the lubricating liquid.

What is the right time to recharge the FM 200 system?

You should recharge the FM 200 system right after its usage. This will give you enough window to ensure the system is refilled with the gas and all its parts properly lubricated.

Conclusion

Since the FM 200 system is so complicated, do ensure to take help from a professional to recharge it in the best possible manner. Apart from this, it would help if you also considered that the fire suppression system works properly after the gas is recharged. So, run a test or ask the professional to do the same.

Fire alarm systems can help prevent lots of accidents on time. And it is not just about an accident causing damage to a property, furniture items, documents, etc. Instead, the alarm systems can easily save environmental damage and loss of life. Over the years, the fire alarm system has undergone many innovations and improvements. We’re not talking about only technological advancements and improvements but also about the changes incorporated to enhance the overall system performance and longevity. Owing to this, you can now have multiple options for different fire alarm system types in Dubai.

Before you buy any fire alarm system, you must know everything about the categories and their functions. Without having a good idea, you won’t be able to choose the right fire alarm system in Dubai. So, let’s look at the most common types of fire detection and alarm systems prevalent in the market at the current time.

Fire alarm system categorization based on operation

Considering the different operations of these fire alarm systems, we can classify them into two different types. These are automatic and manual fire alarms. As most of you are familiar with these terms, we will briefly explain them for reckoning.

1. A manual fire alarm system is the basic one you can have for your house or office. It will sense the fire through the sensors, but you must stop the alarm manually. Similarly, all other functions concerning this alarm system must be operated manually. You won’t be able to connect the alarm to your mobile or any other device.
2. Automatic fire alarm systems are on the rise because they provide the freedom to control the system operations through your mobile. Once you synchronize your mobile application with the alarm system, you can easily operate the same even when you are not close to the Internet or wireless network.

Of these two types, the automatic fire alarm systems sound much better because they can be easily operated through your phone over the Internet even when you aren’t at a close distance.

Addressable fire alarm system

The addressable system is one of the best fire alarm systems that has become quite popular in Dubai. The name can be quite confusing, but the operation is mind-blowing. Simply put, this specific fire alarm system in Dubai uses intelligent technology, specifically artificial intelligence, and machine learning to predict the exact location of the fire based on sensor outputs. Sometimes, the alarms can also predict the fire’s extent and spread, the fire, the future conditions of the fire if not taken care of immediately, and several other facts that will help you prevent any big accident. However, you do need to remember that advisable systems are costly and won’t be suitable for houses too small.

Integrated fire alarm system

Last but not least is the integrated fire alarm system that we need to discuss. As the name suggests, the fire alarm will be integrated with other sensors and alarm systems like thermal sensors, buzzers, automatic door locks, and so on. If you want to establish a smart circuit around the entire property, choosing an integrated fire alarm system to connect it with other devices and tools will be best.

Conclusion

Since we have discussed the most prominent types of fire alarm systems, your job is to decide which one will be best and proceed further. Having so many options in hand might leave you confused, which is why you should consult a doctor or specialist to understand the fire alarm technologies and how these different categories work.

A crisis can plague a business in so many ways. It can be due to power being off for an entire day, the server being down for hours, compromised data warehouses, and more. This is why most businesses have a backup continuity plan that helps reduce the chances of failures and ensure the work can be continued even during the crisis. One such way of managing the crisis in the present time is through the implementation of a structured cabling system.

In a structured cabling system, all the networking and data cables are connected in a proper hierarchy to ensure businesses can leverage the arrangement and ensure the chances of failure are reduced to a significant number. However, it is much easier said than done. One needs to understand the complexities and challenges in implementing a structured cabling system, which is why we have discussed why businesses should focus on this system to handle crises intelligently. The following article will explain how structured cabling in Dubai can benefit your business.

Reliable cabling system

When we consider any system that needs to carry data over a long distance, you need reliability to incorporate the same with your business. Although there are different ways in which other cabling systems can offer excellent performance, they are not that reliable. This is why you need a structured cabling system. Not only is it reliable and trustworthy, but there is no compromise with its performance. It can easily carry data faster from one point to another over the same network. This will further help you relocate the business in any emergency or crisis.

Ability to handle large traffic

It is not easy for regular cabling systems to handle the large inflow of traffic. As a result, they either fail due to huge traffic, or you must restrict usage on the concerned network. If you don’t want that to happen, you should ensure the cabling system is properly structured. Since each data network is allocated a particular cable, it becomes easier for the entire system to deal with large incoming traffic. Besides, you won’t need to worry about system failure because the traffic inflow is beyond the recommended limit.

Flexible cabling 

The structured cabling system is quite flexible. It means you can scale it up or down according to your convenience. If you want to add more channels based on the addition of new peripherals or data centers, you can easily do so without compromising the existing cabling infrastructure. The same is allowed when you must let go of some of the existing network channels in the cabled infrastructure.

Durable and long-lasting

Last but not least, the structured cabling system is highly durable and can easily last for a long time. You won’t even have to give it for frequent maintenance or deal with data loss and corruption. Therefore, having a structured cabling infrastructure will prove to be a boon for your business.

Conclusion

In this article, we have discussed some benefits of choosing a structured cabling Dubai for handling business crises and other problems. Therefore, you need to ensure you don’t choose the wrong cabling system that won’t help your business in any way, especially when dealing with the usual crisis and emergencies.

Fire sprinklers are of various types, and they have specific applications. The traditional sprinklers are ideal for residential and small-scale commercial areas where the fire can be contained within a small space. But if we consider the industrial areas, like any manufacturing plant, research facility, and so on, the water required to extinguish the fire will be huge. Unfortunately, the traditional fire sprinklers won’t be able to meet the requirements.

This is where the deluge fire sprinkler system comes into play. These have open and wide nozzles, and the pipes are always dry instead of being pressurized using air. Therefore, once the smoke or thermal detectors detect the presence of fire, water rushes in through the pipes, and the sprinkler heads spray the water over the concerned area. However, water rushes out of all the discharge valves instead of some to extinguish large-scale fires.

In this article, we will explain the process to be followed for inspecting and testing the deluge fire sprinkler systems.

Inspection of the Deluge fire sprinkler system components

Inspection is the process through which you will confirm that the fire sprinkler system is in good condition and that it will work fine in case there is a fire in the area, and the system is switched on. The inspection needs to be done based on a certain frequency. In this section, we have explained the frequency and the parts you have to inspect for the normal and feasible operations of the Dubai deluge fire sprinkler system.

1. Daily: You need to check the enclosures of the system daily, especially if it is cold weather, because they can have snow build-up and get blocked.

2. Weekly: You need to check the dry pipe gauges, pressure relief valves, and pipe casings every week because these are associated with pressure maintenance and keeping the pipes connected to the sprinkler head dry.

3. Monthly: The exterior of the deluge valves, control valves, dry pipes, and alarm valves need to be checked every month. If these are blocked or rusted, the system won’t work according to the expectations, and the fire won’t be extinguished. You also need to check if the spray nozzles are positioned properly and facing the right direction.

4. Quarterly: Some of the main parts you need to check quarterly are the connections with fire extinguishing components, any signal devices working as the supervisors, drainage, and the foam concentrating drainers.

5. Half-yearly: If there is any supervising signal generation device connected to all the valves in the fire extinguishing system, you need to check the working every six months.

6. Annually: You need to check if the sprinklers are in good condition and the ones that need replacement or repair. You also need to check the spare units you have in hand so that you can replace the bad ones in the coming year. The pipes and fittings also need to be checked in case there are rusted and corroded parts. Check the hangers and supports installed to support the entire system.

Testing of the Deluge fire sprinkler system components

Every year, you must test the following components involved in the Dubai deluge fire sprinkler system.

a. Deluge valve trip test

b. Control valve positioning and its operations

c. Operational examination of the foam water systems

d. Water supply pipes and fixtures

e. Supervisory valves

f. Manually-controlled actuation devices

g. All components present in the assembly of backflow preventionz

h. Discharge device testing

Conclusion

In this article, we have briefed you about the areas you need to test and inspect in the deluge fire sprinkler system. So, what are you waiting for? Get started with the entire process so you won’t have to wait any longer for testing purposes.

Specific pressure is maintained when the hoses are connected to the water source, or the sprinkler system is connected to the water source. It is this pressure that controls the flow of water and its volume. But if the pressures are reduced, water won’t flow at the required volume or the speed needed to extinguish the fire. This is where the fire pumps come into play,

Fire pumps are special equipment units installed to maintain the pressure in the fire extinguishing system and ensure the water is sprayed at the right volume and speed. However, the designing and installation process of the pumps is not easy, especially because certain rules and regulations need to be confirmed.

The following article explains the right design and fire pump installation process that must be followed at all costs.

Key considerations for the fire pump

Need of the fire pump

The first thing you need to check is the requirement of the fire pump system. You don’t need to connect the sprinklers with the fire pump if there are only a few sprinklers and it is the residential unit. Usually, the fire sprinklers utilize the water from the main supply system, and in residential areas, the supplied water is in huge volume than the consumption need.

But when considering the commercial areas, the supplied water pressure won’t be adequate. Furthermore, there are several other fire sprinklers on different floors. So, to maintain the water flow to each sprinkler, you need to ensure the system is connected to the fire pump. The device will easily maintain the water pressure and supply the same to all fire sprinklers.

Types of fire pumps

Two types of fire pumps are usually used in commercial areas. These systems work differently and also have different requirements. Therefore, before installing the system, you must understand which fire pump system will be suitable.

1. In the positive displacement pumps, the water pressure is maintained by repeatedly allowing a certain volume of the water in the pump’s internal chamber and compressing the same before releasing it through the discharge valve.
2. Centrifugal pumps use an impeller that rotates the incoming water at high speed, pushing huge water volume towards the discharge valves. As a result, the water pressure is maintained at the optimum level, and the fire can be extinguished easily.

Choosing the fire pump driver

In the centrifugal fire pumps, several drivers are used. You need to choose the right one to ensure the working of the equipment is optimized. For example, the driver using petrol and diesel is the best compared to the ones using a single type of driver. Also, you need to ensure the chosen driver can meet the requirements of the impeller and the pressure to be generated.

Conclusion

In this article, we have shared the details about the design process and fire pump installations that every company needs to follow. If the processes deviate, there might be legal complications. Plus, the fire pump won’t work in the best way, and the fire won’t be extinguished. So, ensure you follow the process from end to end and work like a pro to extinguish the fire and prevent it from spreading further.